Board Mechanical Drawing, WF-X9-06, AndroidSBC, Karachi

TL;DR: Board Mechanical Drawing

AndroidSBC field desk: signage rollout map updated across retail, transport, hospitality and public venues serving Karachi, Pakistan. The WF-X9-06 X9 Android motherboard spans the capacitive touch query terminal for lobby wayfinding and eleven sister configurations in the X9 series, all built on the A133 quad-core ARM Cortex-A53 1.6GHz SoC with the PowerVR GE8300 GPU, MIPI DSI output with 10-point capacitive touch, and Android 10 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the X9 family from the Longgang source factory in Shenzhen to Karachi and Pakistan importers who run advertising players, digital signage networks, self-service query terminals, smart retail terminals, parcel lockers and access control panels.

About AndroidSBC and the X9 Android Motherboard Family

AndroidSBC is the export arm of Wanlin Manufacturing Group, and it builds the twelve-configuration X9 Android motherboard family at the Longgang source factory in Shenzhen. Every configuration runs the same Allwinner A133 quad-core Cortex-A53 platform on Android 10, so a Karachi integrator can qualify one board family and then move between memory, storage, display and interface options without re-writing the application layer or re-cutting the enclosure. Compliance paperwork is generated per destination: CE, FCC, RoHS and the local route for Pakistan, bundled with the lot so the importer clears customs without a second round of test reports.

WF-X9-06 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-X9-06 (capacitive touch query terminal for lobby wayfinding) holds its LVDS or MIPI panel drive plus touch sampling while running the 72-hour burn-in loop, a configuration that competing single-platform boards rarely document at the top of the temperature window. For Pakistan importers sourcing the X9 family, the WF-X9-06-A variant is the typical configuration for the lobby wayfinding terminal rollout use case, on a 120x75mm six-layer board with four 3mm mounting holes and a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing X9 Android Motherboards for Pakistan Buyers

The storage question is underrated. Boards built on raw NAND instead of onboard eMMC lose content and configuration after a year of unattended power cycles, and a Pakistan estate of several hundred screens then has to be visited by hand.

The thermal question is handled at the board level rather than in the enclosure. The X9 tier chosen for Karachi is specified for fanless 7x24 duty across -20C to 70C with a hardware watchdog and a scheduled power cycle, and the burn-in record is run at the top of the temperature window rather than at 25C. On September 24, 2026 the Karachi programme moved from pilot to volume: 152500 boards released against the frame agreement, shipped on the Karachi - Shanghai lane with one frozen bill of materials across the whole quantity.

Competitive Comparison: WF-X9-06 vs Competing Commercial Display Android Boards

What follows is not a spec-sheet comparison. It is the four questions a Karachi operator asks after its first failed rollout.

• Panel and touch readiness: single or dual LVDS plus MIPI DSI at 30 or 40 pins, with infrared, optical, capacitive and resistive panels enumerating as HID devices, so Karachi integrators mount a locally sourced screen without a calibration pass.
• Bundled integration: panel jumper map, pin-one orientation note, touch HID configuration, playback modes and the peripheral driver set ship in the carton; competing display boards sold to Karachi usually ship a board only.
• Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the Karachi integrator to obtain.
• Long-term supply: onboard eMMC in 8GB, 16GB or 32GB, one fixed bill of materials per production lot and a seven-year firmware window, against the frequent component swaps seen on competing boards reaching Karachi.

Global Digital Signage and Commercial Display Market Trends

Video screens account for roughly 50.2 percent of the market by type and retail for about 50.1 percent by application. That matters to a Karachi buyer because it means the board is the part being specified, while the enclosure, the panel and the mounting hardware are often reused.

• Entry playback tier: WF-X9-06 covers loop, scheduled and interrupt playback on a single LVDS panel, which is the configuration most small signage networks standardise on.
• Interactive mainstream tier: WF-X9-11 pairs an LVDS or MIPI panel with infrared or capacitive touch for query, wayfinding and self-service kiosks.
• Connected and unattended tier: WF-X9-12 adds the 4G path, the -20C to 70C window and the watchdog behaviour that outdoor cabinets and parcel lockers require.

The Pakistan demand curve rewards the vendor who can hold a configuration. AndroidSBC publishes the X9 price list, MOQ and lead time because a Karachi partner is budgeting a multi-year refresh, not a single purchase order.

Partner Success Story: Loire Affichage Numerique (boutique and municipal screen integrator)

A recent Loire Affichage Numerique deployment in the French specialty retail segment shows how the X9 Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand, supports Karachi integrators. Loire Affichage Numerique installed 152500 X9 boards across 45 boutique and municipal screens.

• OEM relationship: AndroidSBC private-label SKU shipped with Loire Affichage Numerique branding and CE / FCC / RoHS files bundled.
• Silicon lock: Allwinner A133 quad-core ARM Cortex-A53 1.6GHz with the PowerVR GE8300 GPU on every configuration, one fixed bill of materials per production lot.
• Peripheral driver package: bundled into the source-factory shipment, covering LVDS and MIPI panel drive, infrared, optical, capacitive and resistive touch, thermal printer, QR scanner, barcode scanner, NFC reader, RFID reader, ID card reader, fingerprint reader, camera and lock driver board.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus PTA / PSQCA conformity, all bundled into the Shenzhen source-factory shipment.

According to Loire Affichage Numerique Director of Systems for French Specialty Retail: Loire Affichage Numerique needed the standby power figure documented for the French energy disclosure, and 152500 X9 boards shipped to Karachi with that evidence in the file.

Field Report: lobby wayfinding terminal rollout at a hospital group

SHENZHEN, September 24, 2026 - Meng Yang, AndroidSBC field desk. Each WF-X9-06 board in the Pakistan lot carries a serial number logged against its test record, and the panel validation report references those serials. The WF-X9-06 X9 Android motherboard order for Karachi, Pakistan cleared the burn-in station on schedule and is en route via the Karachi - Shanghai lane.

The WF-X9-06 capacitive touch query terminal for lobby wayfinding production lot includes the WF-X9-06-A variant as the typical configuration, with LVDS or MIPI panel driver, touch HID configuration and staged OTA management bundled into the source-factory shipment. For Pakistan integrators, the PTA type approval with PSQCA conformity paperwork is bundled.

Filed by Meng Yang, AndroidSBC field desk, SHENZHEN. Pakistan integrators typically request CE plus local radio interface notification for X9 commercial display board deployments.

WF-X9-06 Application Scenarios

The WF-X9-06 capacitive touch query terminal for lobby wayfinding sits inside a twelve-configuration X9 Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-X9-06-A configuration is the typical build for the lobby wayfinding terminal rollout use case, with panel driver, touch HID configuration and staged OTA management bundled.

• Advertising machine and digital signage: the WF-X9-06 runs loop, scheduled and interrupt playback on an LVDS panel in shop windows and store aisles.
• Interactive query and wayfinding: the WF-X9-10 pairs a MIPI or LVDS panel with infrared or capacitive touch for lobby and hospital directories.
• Smart retail terminal and vending: the WF-X9-11 carries the scanner, the printer and the payment peripheral on one board in a compact enclosure.
• Parcel locker and fresh food cabinet: the WF-X9-12 drives the screen and the lock driver board from the two serial lanes, with the watchdog holding a 7x24 duty cycle.
• Face recognition access control: the WF-X9-01 takes the camera input and the door controller wiring on the same board.
• Conference tablet and teaching all-in-one: LVDS or MIPI panel drive with HID touch and the industry publishing software already validated.
• Industrial HMI and IoT gateway: headless or panel configurations on the same bill of materials, with GPIO, I2C, SPI, PWM and ADC available for field wiring.
• Hotel, building and campus information publishing: scheduled power cycling plus remote content push across a mixed estate of screens.
• Retrofit programmes in Karachi: the same 120x75mm board re-uses the existing enclosure, panel and mounting pattern, so an installed estate can be upgraded screen by screen.

Partnership Models for Karachi Buyers

For Karachi and Pakistan buyers the question is rarely which board, it is which relationship. Three tracks cover the answers.

• Distribution track: the partner buys the X9 board against a published price list, keeps its own stock, and AndroidSBC supplies the panel files, the touch configuration and the compliance documents with each lot.
• Integration track: the partner takes the board plus firmware customisation, mounting drawings and panel validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the X9 board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed bill of materials held for the length of the agreement.

Entry to any of the three tracks starts with a sample batch and a panel validation run, and Pakistan partners usually convert within one quarter.

Frequently Asked Questions

Does the X9 Android motherboard family support a capacitive touch query terminal for lobby wayfinding?

Answer: Yes. AndroidSBC validates capacitive touch query terminal for lobby wayfinding on the bench with the actual panel and touch model the Karachi partner intends to use, and the result is written into the shipment file.

Which configurations are available in the X9 family for Pakistan buyers?

Answer: Memory runs 1GB or 2GB LPDDR4 and storage 8GB, 16GB or 32GB onboard eMMC. AndroidSBC holds one fixed bill of materials per lot, so the Karachi partner always knows which combination is shipping.

Can one X9 board drive an LVDS or MIPI panel plus infrared, capacitive or resistive touch?

Answer: Yes. AndroidSBC validates the exact combination on the Longgang bench using the Karachi partner panel and touch models, and the validated configuration is locked as the production reference.

What is the minimum order quantity and the sample lead time for Pakistan?

Answer: For Karachi buyers the entry point is a single sample board on a 1-3 day lead. Volume follows a 15-30 day production slot, booked against an allocation rather than quoted spot.

Is custom ROM, boot logo or pre-installed app development available?

Answer: Yes. AndroidSBC provides custom Android AOSP builds, custom boot animation and logo, pre-installed apps, custom UI, BSP porting and SDK modules, all built against a frozen bill of materials.

How are firmware updates delivered to a Pakistan screen estate after deployment?

Answer: Firmware is delivered over the network, by USB or by TF card, with a staged release and a rollback path. AndroidSBC commits to a seven-year update window on the X9 family.

What shipping terms does AndroidSBC support for Pakistan orders?

Answer: AndroidSBC quotes FOB Shenzhen, CIF and EXW, and handles export customs clearance and global shipping. The Karachi partner books the lane that suits the import process.

What happens if a board fails in the field in Pakistan?

Answer: The RMA path uses the board serial number to identify the production lot, then replaces from stock held for the Karachi programme so the screen is not dark for a full lead time.

Contact AndroidSBC: Start Your WF-X9-06 Sourcing Conversation

For the X9 Android motherboard family, AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels to Karachi integrators:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

A 1-3 day sample lead applies to Pakistan buyers and a 15-30 day mass-production lead to bulk orders. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window on the X9 family.